Quick Answer: How To Access Bluetooth In Divine Spa?

Quick Answer: How To Access Bluetooth In Divine Spa?

How do I pair instream 2?

stream 2 ” has been detected by your device, select it to initiate the pairing process. When asked for a password, type in “5555” to complete the pairing. Once paired, the devices can connect together. At this point, your device will be paired with the in.

What is AUX on hot tub?

AUX input lets you plug in other devices. J-500™ Collection, J-400™ Collection and J-300™ Collection hot tubs have marine-grade speakers plus a subwoofer.

How do you program a Balboa hot tub?

To program, press “Temp,” then “Jets 1.” Press “Temp” to adjust. Press “Jets 1” to exit programming. For non-circ systems, low-speed pump 1 and the ozone generator (if installed) run during filtration. For 24 hour circulation systems, the circ pump and the ozone generator (if installed) run 24 hours.

What does PR mean on Balboa hot tub?

Spa is shut down. Pr = When spa is first actuated, it will go into Priming Mode. ILOC = Interlock failure – possible pump or ozone spike. (—) =Unknown water temperature. (Displays when first powered up after refill).

How do I reset my Balboa WIFI module?

To reset the module to factory settings, use a magnet and hold it on the right side of the module as shown below for about 10 seconds. The module should reset and you will be able to see it in the WI-FI settings.

You might be interested:  Question: How To Kill The Elephant Divine Beast?

Who makes Balboa hot tubs?

Spa Jets. Balboa Water Group is ahead of the game when it comes to providing versatile jet systems. In fact, the company provides consumers with six different jet collections to choose from, which range in price and features.

Does Costco sell Jacuzzi?

Costco offers an amazing selection of premium hot tubs and spas in numerous colors, configurations, and price points, so you can find one that perfectly suits your needs.

How do I pair CleverSpa?

Pairing your CleverSpa ® Hot Tub

  1. Select your. Control Panel Version.
  2. Enter your. Network (WiFi) Details.
  3. Find a good location with the best signal strength. Review the Hot Tub location and once you are happy that your wireless signal strength is suitable tap “Next” to continue.
  4. Enable Pairing Mode on the Hot Tub Control Panel.

Leave a Reply

Your email address will not be published. Required fields are marked *